Digilent

Nexys Video Artix-7 FPGA

Trainer Board for Multimedia Applications

FPGA Features
- Xilinx Artix®-7 XC7A200T-1SBG484C
- 33,650 logic slices, each with four 6-input LUTs and 8 flip-flops
- 13 Mbits of fast block RAM (3x more than the Nexys 4 DDR)
- 10 clock management tiles, each with phase-locked loop (PLL)
- 740 DSP slices
- Internal clock speeds exceeding 450MHz
- On-chip analog-to-digital converter (XADC)
- Up to 3.75Gbps GTP transceivers
Board Features
- Programmable over JTAG, Quad-SPI Flash, microSD, and USB flash drive
- 512MB 800MHz DDR3
- 32MB Quad-SPI flash
- microSD card slot for nonvolatile storage (card not included)
- Dedicated onboard USB port for JTAG programming and data transfers
- Powered from any 12V source (36W wall supply included)
- HDMI sink and HDMI source
- Mini DisplayPort source
- 240bit Audio codec w/ four 3.5mm jacks
- 10/100/1000 Ethernet PHY with included unique MAC address
- User EEPROM
- USB-UART bridge
- Digilent parallel transfer interface (DTPI) for high-speed data transfers over USB
- Digilent serial peripheral interface (DSPI) for medium-speed data transfers over USB
- Onboard user interfaces: 128x32 monochrome OLED display, 5 user push buttons, 8 user switches, 8 user LEDs
- USB HID host for mice and keyboards
- Fully-populated 160-pin FMC LPC connector
- Four Pmod ports, Pmod for XADC signals

The Nexys Video is a powerful platform for audio/video applications. Built around the Artix®-7 XC7A200T, the most powerful chip from the Xilinx® Artix-7 FPGA family, the Nexys Video has all the performance and FPGA real estate needed for high-bandwidth and low-latency A/V processing.

Utilizing A/V signals is made easy with an on-board Mini DisplayPort, three high-speed digital video ports, and a 24-bit audio codec. One can conveniently scale their design with Ethernet, UART, and USB interfaces and integrate it into larger systems. There is no limit to customizability with the 160-pin FMC LPC connector and four additional Pmod ports.

The Nexys Video is supported by Xilinx's Vivado Design Suite, including the free WebPACK edition, making the Nexys Video a great option for any budget.

Nexys Video Artix-7 FPGA

Artix-7 FPGA Development Board with SYZYGY-compatible Expansion

Nexys Video Artix-7 FPGA

Breadboardable Spartan-7 FPGA Module

Nexys Video Artix-7 FPGA

ARM/FPGA SoC Development Board

Nexys Video Artix-7 FPGA

Zynq Ultrascale+ MPSoC Development Board

Nexys Video Artix-7 FPGA

Zynq-7000 Single Core for ARM/FPGA SoC Development

Nexys Video Artix-7 FPGA

Breadboardable Artix-7 FPGA Module

Nexys Video Artix-7 FPGA

Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion

Nexys Video Artix-7 FPGA

Zynq-7000 SoC Development Board

Nexys Video Artix-7 FPGA

Zynq-7000 ARM/FPGA SoC Development Board

Nexys Video Artix-7 FPGA

Kintex-7 FPGA Development Board

Nexys Video Artix-7 FPGA

Spartan-7 FPGA Development Board

Nexys Video Artix-7 FPGA

Python Productivity for Zynq-7000 ARM/FPGA SoC

The Nexys Video can be programmed with Digilent's Adept software. Digilent Adept is a unique and powerful solution which allows you to communicate with Digilent system boards and a wide assortment of logic devices. Find out more about Adept here.

To create and modify designs for your Nexys Video, you can use Xilinx's Vivado Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. The Nexys Video is supported by the free WebPACK edition of the Vivado Design Suite.

System Boards

Kumpulan Abex Sdn Bhd

Digilent

Nexys Video Artix-7 FPGA

System Boards