Digilent

Nexys A7

FPGA Trainer Board Recommended for ECE Curriculum

Contact Our Expert

Get a Quote

FPGA Features
- Internal clock speeds exceeding 450MHz
- On-chip analog-to-digital converter (XADC)
- Programmable over JTAG and Flash
System Features
- USB-JTAG programming circuitry
- 16 MB QSPI Flash
  - Due to supply chain constraints, either the S25FL127S or S25FL128S Flash Memory may be loaded on your board. These parts are not functionally equivalent, but flash programming through Vivado and the QSPI boot mode are not affected. More information can be found in the Nexys A7 Reference Manual, available in the Support tab.
- Powered from USB or any 7V-15V source
- microSD card connector
System Connectivity
- 10/100 Mbps Ethernet
  - Note: Xilinx-provided software support for the Nexys A7's ethernet interface is limited in versions of Vivado 2019.2 and newer. For more information, see the Ethernet PHY section of the Nexys A7 reference manual, which can be found through the Support tab.
- USB-UART Bridge
Interaction and Sensory Devices
- 3-axis accelerometer
- PDM microphone
- PWM audio output
- Temperature Sensor
- 2 four-digit seven-segment displays
- USB HID for mice, keyboards, and memory sticks
- 16 Switches
- 16 LEDs
- 2 tri-color LEDs
- 12-bit VGA output
Expansion Connectors
- 4 Pmod connectors
- Pmod for XADC signals

Product Compliance:

HTC: 8471500150
ECCN: 5A992.c

The Nexys A7 (previously known as the Nexys 4 DDR) is an incredibly accessible, yet powerful, FPGA development board. Designed around the Xilinx Artix®-7 FPGA family, the Nexys A7 is a ready-to-use digital circuit development platform that brings industry applications into the classroom environment.

Students can start learning right away with the Nexys A7 thanks to its versatile selection of interfaces, such as 10/100 Ethernet, USB, UART, JTAG, and VGA. With a built-in temperature sensor, microphone, and accelerometer, students can work on a variety of projects without needing any additional hardware. Of course, 5 Pmod ports are available for additional customizability and applications.

The Nexys A7-100T features the XC7A100T-1CSG324C.

The Nexys A7 is supported by Xilinx's Vivado Design Suite, along with the free WebPACK edition, which helps keep costs down for students.

Nexys A7

Artix-7 FPGA Development Board with SYZYGY-compatible Expansion

Nexys A7

Breadboardable Spartan-7 FPGA Module

Nexys A7

Spartan-7 FPGA Development Board

Nexys A7

Zynq Ultrascale+ MPSoC Development Board

Nexys A7

Trainer Board for Multimedia Applications

Nexys A7

ARM/FPGA SoC Development Board

Nexys A7

Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion

Nexys A7

Zynq-7000 Single Core for ARM/FPGA SoC Development

Nexys A7

Breadboardable Artix-7 FPGA Module

Nexys A7

Kintex-7 FPGA Development Board

Nexys A7

Zynq-7000 SoC Development Board

Nexys A7

Zynq-7000 ARM/FPGA SoC Development Board

The Nexys A7 can be programmed with Digilent's Adept software. Digilent Adept is a unique and powerful solution which allows you to communicate with Digilent system boards and a wide assortment of logic devices. Find out more about Adept here.

To create and modify designs for your Nexys A7, you can use Xilinx's Vivado Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. Both variants of the Nexys A7 are supported by the free WebPACK edition of the Vivado Design Suite.

System Boards

Kumpulan Abex Sdn Bhd

Digilent

Nexys A7

System Boards