Digilent

Genesys 2

Kintex-7 FPGA Development Board

Contact Our Expert

Get a Quote

The Genesys 2 offers a robust collection of ports and peripherals, including:

Fully-populated 400-pin FMC HPC connector w/ ten GTX lanes
USB-UART Bridge
128x32 pixel OLED
16-bit VGA connector
Pmod connector for XADC signals
Two four-lane DisplayPort connectors
HDMI Sink and HDMI Source
10/100/1000 Ethernet PHY
1GB 1800Mbps on-board DDR3
USB 2.0 Host/Device/OTG PHY
Dedicated USB port for JTAG programming and data transfers
Micro SD card connector
Audio codec w/ four 3.5mm jacks
Serial Flash
Five Pmod ports
USB HID Host for mice, keyboards and USB MSD Host for storage

On-board FPGA: Xilinx Kintex-7™ FPGA (XC7K325T-2FFG900C)
- 50,950 logic slices, each with four 6-input LUTs and 8 flip-flops
- 16 Mbits of fast block RAM
- Ten clock management tiles, each with a phase-locked loop (PLL)
- 840 DSP slices
- Internal clock speeds exceeding 450MHz
- On-chip analog-to-digital converter (XADC)
- Up to 10.3125Gbps gigabit transceivers
- 1800Mbps DDR3 data rate with 32-bit data width
- Commercial -2 speed grade

The Genesys 2 is a high-performance, ready-to-use FPGA development board built around the Xilinx Kintex-7 FPGA. The Genesys 2 is a powerhouse for data and video processing applications, but offers a variety of peripherals making it a great solution for a wide array of projects.

Everything needed for robust multimedia applications is already available on the board: DisplayPort connectors, HDMI sink and source, 16-bit VGA, 128x32 pixel OLED screen, and an audio codec with four 3.5mm jacks. One can quickly get started with A/V, image processing, or other multimedia applications without needing additional hardware.

Working on other applications, or looking for more customizability? The Genesys 2 also offers five Pmod ports and a fully populated FMC HPC connector, which provide limitless expansion options. Additionally, the 10/100/1000 Ethernet, USB 2.0, and a USB HID host for mice and keyboards make the Genesys 2 easily integrated with other systems.

The powerful Kintex-7 XC7K325T-2FFG900C will have no trouble keeping up with your designs made in Vivado Design Suite or ISE. The free WebPACK version of the Vivado Design Suite does not support the Kintex-7 325T, but a voucher is provided for Vivado HL Design Edition at no extra cost.

Genesys 2

Artix-7 FPGA Development Board with SYZYGY-compatible Expansion

Genesys 2

Trainer Board for Multimedia Applications

Genesys 2

ARM/FPGA SoC Development Board

Genesys 2

Zynq Ultrascale+ MPSoC Development Board

Genesys 2

Zynq-7000 Single Core for ARM/FPGA SoC Development

Genesys 2

Breadboardable Artix-7 FPGA Module

Genesys 2

Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion

Genesys 2

Zynq-7000 SoC Development Board

Genesys 2

Zynq-7000 ARM/FPGA SoC Development Board

Genesys 2

Breadboardable Spartan-7 FPGA Module

Genesys 2

Spartan-7 FPGA Development Board

Genesys 2

Python Productivity for Zynq-7000 ARM/FPGA SoC

The Genesys 2 can be programmed with Digilent's Adept software. Digilent Adept is a unique and powerful solution which allows you to communicate with Digilent system boards and a wide assortment of logic devices. Find out more about Adept here.

To create and modify designs for your Genesys 2, you can use Xilinx's Vivado Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. The Genesys 2 is not supported by the free WebPACK edition of the Vivado Design Suite, but a voucher is provided with the board at no additional cost.

System Boards

Kumpulan Abex Sdn Bhd

Digilent

Genesys 2

System Boards