.png){kind=small}
Digilent
Cmod A7-35T
Breadboardable Artix-7 FPGA Module
System Features
512KB SRAM with an 8-bit bus and 8ns access times
4MB Quad-SPI Flash
USB-JTAG Programming Circuitry
Powered from USB or external 3.3-5.5V supply connected to DIP pins
System Connectivity
USB-UART bridge
Interaction and Sensory Devices
2 LEDs
1 RGB LED
2 Push Buttons
Expansion Connectors
48-pin DIP connector with 44 Digital I/O and 2 Analog inputs (0-3.3V)
One Pmod connector with 8 Digital I/O
The Cmod, or Carrier Module, family of products is designed to offer quick, simple, and flexible integration of an FPGA into circuit design, prototyping, and learning/hobby projects.
The Digilent Cmod A7 is a small, 48-pin DIP form factor board built around a Xilinx® Artix®-7 FPGA that brings FPGA power and prototyping to a solderless breadboard.
The board includes a Quad-SPI flash for programming, as well as a USB-JTAG programming circuit and USB-UART bridge. The Cmod A7 also features a clock source, Pmod port, and onboard I/O with LEDs and pushbuttons. There are 44 FPGA I/O signals that are routed to 100-mil-spaced through-hole pins, making the Cmod A7 compatible with solderless breadboards. This form factor makes the Cmod A7 a great option for flexible and affordable prototyping, or learning FPGA and digital logic circuits. At just .7" by 2.75", it can also be loaded in a standard socket and used in embedded systems.
The Artix®-7 FPGA on the Cmod A7 provides the highest performance-per-watt fabric, transceiver line rates, DSP processing, and AMS integration for a cost-optimized FPGA. With the MicroBlaze Soft Processor Core from Xilinx, you can create embedded applications with a variety of peripherals, memory, and interfaces.
If your design does not require the transceiver lines or higher-performance of the Artix®-7 FPGA, we recommend the more affordable Cmod S7, featuring a Spartan®-7 FPGA.
Cmod A7-35T
Artix-7 FPGA Development Board with SYZYGY-compatible Expansion
Cmod A7-35T
Breadboardable Spartan-7 FPGA Module
Cmod A7-35T
Spartan-7 FPGA Development Board
Cmod A7-35T
Zynq Ultrascale+ MPSoC Development Board
Cmod A7-35T
Trainer Board for Multimedia Applications
Cmod A7-35T
ARM/FPGA SoC Development Board
Cmod A7-35T
Zynq-7000 SoC Development Board with SYZYGY-compatible Expansion
Cmod A7-35T
Zynq-7000 Single Core for ARM/FPGA SoC Development
Cmod A7-35T
Zynq-7000 ARM/FPGA SoC Development Board
Cmod A7-35T
Kintex-7 FPGA Development Board
Cmod A7-35T
Zynq-7000 SoC Development Board
Cmod A7-35T
Python Productivity for Zynq-7000 ARM/FPGA SoC
The Cmod A7 can be programmed with Digilent's Adept software. Digilent Adept is a unique and powerful solution which allows you to communicate with Digilent system boards and a wide assortment of logic devices. Find out more about Adept here.
To create and modify designs for your Cmod A7, you can use Xilinx's Vivado Design Suite. Vivado is a software designed for the synthesis and analysis of HDL designs. Both variants of the Cmod A7 are supported by the free WebPACK edition of the Vivado Design Suite.
If you are using the MicroBlaze Soft Processor Core from Xilinx, you can make use of the Vitis Core Development Kit or Xilinx Software Development Kit to create embedded applications for your Cmod A7.